Thanks. I liked the idea of them holding a ladder in place with a bundle of shingles.
Hank
Art O said
Dec 20, 2013
It's a Roofing video, but it has some good tips. Like keep your ladder away from wires.
Patrick G said
Dec 20, 2013
And wearing clothes while outside............
Chris Mozick said
Feb 16, 2015
I use metal steaks to hold my ladder to the ground. Great safety tips
BlueRidge said
Feb 16, 2015
Chris Mozick wrote:
I use metal steaks to hold my ladder to the ground. Great safety tips
A crow bar works well for this. I have a small one I have used for years. Drive it in at an angle opposite of the ladder and let the hook go over the rung.
SprayWash said
Feb 16, 2015
We use the crow bar too, Brett!
Dave O said
Feb 16, 2015
It's good to have a safety refresher now and then to help keep safety on our minds.
Maverick Contracting said
Feb 16, 2015
I too use stakes to secure. Usually on the inside and tie back BUT you need to make sure you know what's underground, don't want to go thru a irrigation pipe or drain pipe. Also go in at a 45 degree ish angles rope does not slip off. When working near electrical wires I have the guys tie back the tops so the ladder cannot slide into it. Also when putting the ladder on an angled side of a roof there is a roof "triangle" that you can get at any good paint Store "recc." Sherwin williams, that will level off the pitch to make it safer.
-- Edited by Maverick Contracting on Monday 16th of February 2015 06:26:49 PM
BlueRidge said
Feb 18, 2015
Maverick Contracting wrote:
I too use stakes to secure. Usually on the inside and tie back BUT you need to make sure you know what's underground, don't want to go thru a irrigation pipe or drain pipe. Also go in at a 45 degree ish angles rope does not slip off. When working near electrical wires I have the guys tie back the tops so the ladder cannot slide into it. Also when putting the ladder on an angled side of a roof there is a roof "triangle" that you can get at any good paint Store "recc." Sherwin williams, that will level off the pitch to make it safer.
-- Edited by Maverick Contracting on Monday 16th of February 2015 06:26:49 PM
The pivot is a great tool. My first one grew legs so I had to get another. It is also great for steps when you need to put the ladder there. We added Quick Connect Ladder Levelers to all the ladder and have only two levelers and base units on all ladders. I chose do do it that way because we seldom have more than two ladders out at the same time.
Michael Hickey said
Feb 18, 2015
we have been using ladder base mate for the last four years or so and find them the best ladder stabilising device we have used. There are two types one can be put on and taken off as you want and the other is bolted on, this model is far cheaper than the one that can be put on and taken off. Just type in ladder basemate into you tube and you can see for yourself how they work.
Art,
Thanks. I liked the idea of them holding a ladder in place with a bundle of shingles.
Hank
A crow bar works well for this. I have a small one I have used for years. Drive it in at an angle opposite of the ladder and let the hook go over the rung.
I too use stakes to secure. Usually on the inside and tie back BUT you need to make sure you know what's underground, don't want to go thru a irrigation pipe or drain pipe. Also go in at a 45 degree ish angles rope does not slip off. When working near electrical wires I have the guys tie back the tops so the ladder cannot slide into it.
Also when putting the ladder on an angled side of a roof there is a roof "triangle" that you can get at any good paint Store "recc." Sherwin williams, that will level off the pitch to make it safer.
http://provisiontools.com/products/pivit-laddertool
-- Edited by Maverick Contracting on Monday 16th of February 2015 06:26:49 PM
The pivot is a great tool. My first one grew legs so I had to get another. It is also great for steps when you need to put the ladder there. We added Quick Connect Ladder Levelers to all the ladder and have only two levelers and base units on all ladders. I chose do do it that way because we seldom have more than two ladders out at the same time.