High flow when you need it and the ability to restrict the flow for sensitive situations.
Note: Accumulators come with (2)1/2" barbed hose fittings and (2)1/2" threaded hose fittings. If you use 5/8" hose you will need port kit part #20381033 that consists of (2) qc x 5/8 barb. Or you can use the qc x 1/2 mpt ports that come with accumulator and adapt your existing fittings.
We now have accumulators made by FloJet you install them in the outlet hose of any diaphragm pump with a pressure switch. They let you restrict the flow of the pump without damaging the pressure switch or relay by excessive cycling.
How does it work?
When the pump starts, liquid enters the reservoir compressing the bladder until the maximum pressure for the pressure switch is reached then the pump shuts off. When water is demanded, pressure in the air chamber forces liquid into the system. Pump stays off until the minimum pressure is reached on the switch. Then pump turns on, reducing cycling leading to longer switch and pump life.
FEATURES • Internal Bladder • Smoother and More Even Flow • Quieter Water System • Better Temperature Control • Longer Pump Life • Lower Battery Drain • Simply Fitted to New or Existing Systems • Compact Size • Snap-in Port Fittings include both: 1/2" Barbed Hose Fittings and 1/2" Threaded Hose Fittings
SPECIFICATIONS Tank: Hygienic, Light, Compact, Impact and Pressure Resistant Plastic Construction Capacity: 1 liter (33 fl oz) Max. Operating Pressure: Up to 125 psi (8.6 bar) Pre-Charge Pressure: 10 psi (0.7 bar) Air Valve: Standard Tire Valve Weight: 1.6 lb (0.7 kg) Dimensions: 13-1/4" (337 mm) x 4-3/4" (119 mm)
"Thanks You! I know when I call you'll come thru with what I need, there are very few companies that I can say that about. Maybe sometime I'll get the chance to buy ya a cup of coffee or a beer. Until then Thanks A lot"
-- Edited by Art O on Wednesday 12th of March 2014 07:26:51 AM
gutterdog said
Mar 12, 2014
I got one on my dual pump. I still dont understand how they work and I've been told more than once.
Capital Roof Wash said
Mar 12, 2014
Not to hi-jack the thread but the picture of the ball valve needs a recommendation from me. I had a 5,000 psi ball valve that needed two guys and a front end loader to turn it on and off. Thanks to Doug Ruckers and a dude out of Texas, they turned me on to the ball valve from Pressure Tel (Bob).
Sometimes I shed a tear because it's a dream to switch over from the wand to the surface cleaner and back again with ease. I have to tell my helper that I just have something in my eye...
Accumulators
> FLOJET ACCUMULATOR TANK MODEL 305730001AGet the best of both worlds!
High flow when you need it and the ability to restrict the flow for sensitive situations.
Note: Accumulators come with (2)1/2" barbed hose fittings and (2)1/2" threaded hose fittings. If you use 5/8" hose you will need port kit part #20381033 that consists of (2) qc x 5/8 barb. Or you can use the qc x 1/2 mpt ports that come with accumulator and adapt your existing fittings.
How does it work?
When the pump starts, liquid enters the reservoir compressing the bladder until the maximum pressure for the pressure switch is reached then the pump shuts off. When water is demanded, pressure in the air chamber forces liquid into the system. Pump stays off until the minimum pressure is reached on the switch. Then pump turns on, reducing cycling leading to longer switch and pump life.
FEATURES • Internal Bladder • Smoother and More Even Flow • Quieter Water System • Better Temperature Control • Longer Pump Life • Lower Battery Drain • Simply Fitted to New or Existing Systems • Compact Size • Snap-in Port Fittings include both: 1/2" Barbed Hose Fittings and 1/2" Threaded Hose Fittings
SPECIFICATIONS Tank: Hygienic, Light, Compact, Impact and Pressure Resistant Plastic Construction Capacity: 1 liter (33 fl oz) Max. Operating Pressure: Up to 125 psi (8.6 bar) Pre-Charge Pressure: 10 psi (0.7 bar) Air Valve: Standard Tire Valve Weight: 1.6 lb (0.7 kg) Dimensions: 13-1/4" (337 mm) x 4-3/4" (119 mm)
TRUCK / GUTTER
QUICK COUPLERS / TWIST COUPLERS / PLUGS / ORINGS
DRUM PUMPS / WRENCHS / FAUCETS
HIGH PRESSURE / LOW PRESSURE / FUEL/ AIR
QC / THREADED
HIGH PRESSURE / WHIP LINES / FEED HOSE
OILS / DIESEL ADDITIVES / HOUR METER / SPRAY LUBE / TEFLON TAPE / HOSE CLAMPS/AIR FILTERS
COLD WATER / HOT WATER
WE ONLY SHIP TO THE CONTIGUOUS 48 US STATES
WE ARE A SUPPLIER FOR PROFESSIONAL CONTRACT CLEANERS
Sale Price ! $618.22
Sale Price ! $34.74
Sale Price ! $132.32
Sale Price ! $33.78
-- Edited by Art O on Wednesday 12th of March 2014 07:26:51 AM
I got one on my dual pump. I still dont understand how they work and I've been told more than once.
Not to hi-jack the thread but the picture of the ball valve needs a recommendation from me. I had a 5,000 psi ball valve that needed two guys and a front end loader to turn it on and off. Thanks to Doug Ruckers and a dude out of Texas, they turned me on to the ball valve from Pressure Tel (Bob).
Sometimes I shed a tear because it's a dream to switch over from the wand to the surface cleaner and back again with ease. I have to tell my helper that I just have something in my eye...