I have been selling roofs (roof estimator) and replacing them through Homeowner Insurance for the last three years. I recently bought a brand new Kings Spayed KS50P70 Skid Rig. It's 50 gallon, 10 gpm, and I am using this to grind my to the entire trailer rig with a 300 and a 150 gallon tanks.
Some advice on getting to my goal quicker please. This little system is great, but I want the big boy. What are the steps to cleaning say, a 30 square roof with a medium pitch, say 6:12? Act as if you are arrived on site with my 50 gallon system.
ParaRoofer said
Nov 24, 2019
Also, what chemicals did you put in the tank? And what do you use to protect landscaping? How do you rinse? Assuming I spray chemical on roof, then rinse. I guess a few square at a time. ???
Art O said
Nov 24, 2019
Hi Jeremy
There’s a search button at the top of the forum. Type in your question and read. All the information is here. If you see a thread that interests you, post in it and we will help you out.You just have to find it. And it’s free!!!!! No need the pay for an instructor or go to a School. There is also plenty of free events that you can go to also.
BlueRidge said
Nov 25, 2019
Jeremy,
I looked up a Kings Sprayer KS50P70 because I have no clue what it is and I doubt anyone here can help you with your question since we use different systems. If it sprays 10 gpm with a 50 gal tank, you will have to keep mixing batches. Most smaller roofs won't take 50 gals. When I started I had a 65 gal batch mix tank and would have to mix at least twice a day, some days more.
Most of us have gone to mixing valves so we no longer need to batch mix.
As Art said, enter in what you are looking for and it will most likely be here. Also, take a look at rigs, some good stuff there. A lot of people here build their own stuff while other buy skids.
Brett
Diamond Roof Cleaning said
Nov 26, 2019
Best Advice anyone has given me. READ....READ.... USE THE SEARCH BUTTON FEATURE..... THEN READ TILL YOUR EYES ARE RED...
Hope this Helps. Thank You for your Service..
Jeff Wible said
Nov 28, 2019
The best part about reading is you gain answers to questions you didn't know you had!
Jeff
BlueRidge said
Nov 29, 2019
Jeff Wible wrote:
The best part about reading is you gain answers to questions you didn't know you had!
Jeff
Well put Jeff!
Jeff Wible said
Dec 2, 2019
Hope you're doing well Brett!,.Oh,.and everyone else also,..Ha, Ha,...
Jeff
BlueRidge said
Dec 11, 2019
Jeff Wible wrote:
Hope you're doing well Brett!,.Oh,.and everyone else also,..Ha, Ha,...
Jeff
A banner year with the same problems as everyone else... the labor pool!
It's good to see you back as usual... in the winter!
Hi Jeremy
There’s a search button at the top of the forum. Type in your question and read. All the information is here. If you see a thread that interests you, post in it and we will help you out.You just have to find it. And it’s free!!!!! No need the pay for an instructor or go to a School. There is also plenty of free events that you can go to also.
Jeremy,
I looked up a Kings Sprayer KS50P70 because I have no clue what it is and I doubt anyone here can help you with your question since we use different systems. If it sprays 10 gpm with a 50 gal tank, you will have to keep mixing batches. Most smaller roofs won't take 50 gals. When I started I had a 65 gal batch mix tank and would have to mix at least twice a day, some days more.
Most of us have gone to mixing valves so we no longer need to batch mix.
As Art said, enter in what you are looking for and it will most likely be here. Also, take a look at rigs, some good stuff there. A lot of people here build their own stuff while other buy skids.
Brett
Hope this Helps. Thank You for your Service..
Jeff
Well put Jeff!
Jeff
A banner year with the same problems as everyone else... the labor pool!
It's good to see you back as usual... in the winter!